ETO Prior Builds

V12.0.26 / 14.0.9 / 16.0.2 Changes 14-JUL -16

  • Updated WW Internal Resources

V12.0.25 / 14.0.8 / 16.0.1 Changes 23-MAY -16

  • Added check that Mfg Estimate window is still open when the treeview refresh routine runs (#20163018)
  • Added check that Where Used window is still open when the treeview refresh routine runs (#20161329)
  • Fixed issue with Overhead Costing calculation (#20163024)
  • Added a dex.ini switch to change between ETO Costing method and MFG Costing method

V11.0.25 / 12.0.24 / 14.0.7 Changes 1-MAR-16

  • Added additional error checking on integrations to MFG Lookups to prevent illegal address errors (#20160559)
  • Added check on Mfg Estimate window close to ensure SOP Doc recalc is complete (#20151947)

V11.0.24 / 12.0.23 / 14.0.6 Changes 16-DEC-2015

  • Fixed rounding issue caused by a hard-coded currency decimal setting in the Cost Rollup routine.

V11.0.23 / 12.0.22 / 14.0.5 Changes 1-DEC-2015

  • Added support for multi-currency. The ME will now display in either the currency decimals assigned to the item (non-multicurrency), or the functional currency decimals (multicurrency).  Update SOP will calculate the originating amounts using the Currency ID assigned to the Quote.

V11.0.22 / 12.0.21 / 14.0.4 Changes 16-OCT-15

  • Costing routine: If Margin/Markup was entered in the Estimation Qtys window prior to Recalculating, the Unit Cost was saved at zero. The costing routine now recalculates the Unit Price.
  • Costing table (W6992Costing) now stores calculated Profit in CostArray_20.

V11.0.21 / 12.0.20 / 14.0.3 Changes 14-OCT-15

  • Backflush on header now prompts before rolling down changes, and applies as a default to new components.

V11.0.20 / 12.0.19 / 14.0.2 Changes 17-SEP-15

  • GP2015R2-updated call to tax recalculation when Accepting an estimate (fixes “wrong number of arguments” error)
  • ME Header-level backflush checkbox now auto-marks/unmarks backflush on all components
  • Copy ME: (a) Costing-fixed ‘cannot insert null into column MKTOPROC’ error, (b) now clears SOP Link from source ME when copying to new ME
  • Treeview now shows component cost using the Item’s Currency Decimals setting
  • Costing table now shows costs using the Currency Decimals setting of the Parent Item.

V11.0.19 / 12.0.18 / 14.0.1 Changes 23-DEC-14

  • Updates for GP2014 (v14) release
  • GP version 10 development & support discontinuation

V10.0.19 / 11.0.18 / 12.0.17 Changes 25-NOV-14

  • ME Copy: fixed issue copying BOM-Routing Links from GP MFG when link method was set to ALL that caused the quantity to copy incorrectly.
  • ME: added delete buttons to scrolling window lines (Misc Costs, Routing, BOM-Routing Links).

V10.0.18 / 11.0.17 / 12.0.16 Changes 21-NOV-14

  • ME Copy: (a) fixed issue in the copy routine that prevented copying when the Source Item Number + Destination BOMID existed in the system. (b) fixed quantity conversion issue when copying quantities from MFG BOMs where components quantities were not in the base UofM.
  • Add/Edit Component: (a) fixed issue that caused the window to default UofM back to the Base U of M each time a component was viewed. (b) fixed issue displaying components which are subassemblies which could cause a call stack error.
  • ME Accept: (a) fixed a quantity conversion issue with the Fixed Quantity when it was not in the Base UofM.

V10.0.17 / 11.0.16 / 12.0.15 Changes 4-OCT-14

  • ME Copy: Fixed Destination BOM ID field length. Incorrect length caused long entries to truncate which could prevent copy from working because it would result in a duplicate record. Fixed issue when copying an existing Manufacturing BOM that contained the same sub-assembly at different levels of the BOM using different BOM Types, which could result in a duplicate key error. Fixed issue when copying a ME-BOM that caused a duplicate key error in SY03900 if a record has a note index = 0.  Copying an existing ME-BOM now always sets the BOM Status back to Design for the new BOM.  Fixed-ME-BOM copy was not using the To Item Description or To BOM Description.
  • BOM-Routing Links: the links are now copied from GP Manufacturing when a BOM is copied into ETO, and accepting an ME will create BOM-Routing Links in the Manufacturing module.
  • Add/Edit Component: fixed issue with UofM Lookup buttons where they did not work for ME Items. Added Vendor Item Zoom which opens the Vendor Item Maintenance window.
  • Fixed issue that caused Note Present button to display when note index was zero.
  • ME Maintenance: fixed issue that would sometimes cause it to not correctly identify ‘new’ item numbers, so the Item Number zoom opened the wrong window. Added GoTo to Item Price List Maintenance4
  • Acceptance Process – The process will now create an Item-Vendor record, if one doesn’t exist, and it will update the Last Invoice Cost/Originating Invoice Cost with the Quoted Unit Price from the Add/Edit Component window.

V10.0.16/ 11.0.15 / 12.0.14 Changes 26-SEP-14

  • Updated WW Internal Resources

V10.0.15/ 11.0.14 / 12.0.13 Changes 18-SEP-14

  • Updated WW Internal Resources

V10.0.14/ 11.0.13 / 12.0.12 Changes 16-JUL -14

  • Updated WW Internal Resources

V10.0.13/ 11.0.12 / 12.0.11 Changes 22-MAY-14

  • Updated WW Internal Resources
  • Fixed issue where costs were not displayed with correct currency decimals
  • Fixed issue where machine overhead costs were not calculating correctly
  • ME: TreeView-fixed issue where double-clicking on a sub-assembly to open the Add/Edit component window produced a call stack error.

V10.0.12/ 11.0.11 / 12.0.10 Changes 15-NOV-13

  • Changed “Send to SOP” function to send all marked lines.
  • Add routine to “refresh” the SOP Lines if “Send to SOP” is clicked multiple times
  • Fixed issue with Send To SOP where the SOP Header totals were not recalculating correctly.
  • Added control to Send To SOP and Accept to check if the linked SOP Document is in use by another user before allowing update.

V10.0.11/ 11.0.10 / 12.0.9 Changes 2-NOV-13

  • Estimation Qtys: put “Send To SOP” button back onto window so a selected qty line can be used to update the linked Quote Line prior to accepting the estimate.
  • Added 3rd Party Integration points

V10.0.10 / 11.0.9 / 12.0.8 Changes 20-SEP-13

  • Updated WW Internal Resources
  • Fixed issue with Setup option to update Pro-rate Qty where it did not correctly enable, which caused the prorate quantity in MFG to not get updated.

V10.0.9 / 11.0.8 / 12.0.7 Changes 13-SEP-13

  • Updated WW Internal Resources
  • Accept process: (a) now uses a new integration point in MFG PowerPack’s Item Copy. The change prevents ETO from copying the source item’s BOM and Routing.  The latest build of MFG PowerPack must be installed (at least 10.0.104 / 11.0.78 / 12.0.29).  The Accept process, before starting, now checks that MFG PowerPack is installed and has a build number containing the new integration point.  (b) Accepting an estimate now creates CONFIGURED BOMs rather than Archived BOMs.  (c) If possible, the Routing will be set as the Primary Routing if no other routing exists for the new item. (d) Complete costing information is pushed through to Item Maintenance and the manufacturing costing tables for Standard Cost items, and for Actual Cost it sets the Current Cost on Item Maintenance. (e) If no MFG BOM exists it will create both an MFG BOM and the default CONFIG BOM. (f) If multiple Estimation Quantities are Accepted on the Estimation Quantities window, multiple lines will be added to the SOP Quote. (g) It now changes BOM Status to a new status called Accepted, and prevents further changes to the estimate.
  • Mfg Est Item Maint: window no longer automatically zooms to Item Maintenance if a GP Item is selected. The Mfg Est window displays, and the user can manually zoom to the GP Item.
  • Copy functionality: (a) fixed issue where duplicate key errors were generated if the source item had both an MFG and ENG BOM, (b) fixed issue copying Estimation Qtys that resulted in an ‘insert nulls’ error, (c) creates the default Est Qty of 1 record for each BOM during the copy process. (d) Copy process now copies notes from the Routing Sequences, BOM Lines and BOM Header. A separate copy of the notes are made and attached to the ME.
  • SOP-ME Link: controls have been added to prevent deleting a sales line, a sales document, or a sales batch if there are links to Mfg Estimates. The links need to be broken first from the Mfg Estimate.
  • Routing Notes: (a) when copying a MFG Routing to ME Routing, or a ME Routing to a new ME Routing, the MFG Notes are duplicated so the ME Routing has its own copy of the note, (b) Notes buttons were added to the Routing window so routing sequence notes can be added/edited, (c) Accepting an ME creates MFG Routings with routing sequences notes from the ME Routing.
  • BOM Notes: The BOM Header and BOM Line Notes now integrate with GP MFG Notes. When an estimate is created by copying a GP BOM, copies are made of the notes so the estimate has it’s own version of the note.
  • Add Component: (a) save/clear now cause the BOM Line to automatically set to the next Line Number, (b) new Total Qty field shows sum of Per Piece Qty + Shrink, and Fixed Qty.
  • ME Treeview now shows total component qty (Per Piece qty + Shrink, and Fixed Qty).
  • Estimation Quantities: scrolling window now has a checkbox to mark one or more Estimation Quantities as Accepted.

V10.0.8 / 11.0.7 / 12.0.6 Changes 10-APR-13

  • Updated WW Internal Resources
  • Added Estimation Quantities – the estimate can now calculate costs for an unlimited number of production quantities
  • Shrink % – cost calculation was not including shrinkage
  • SOP Link: the SOP Link update now updates Cost and Price.

V10.0.7 / 11.0.6 / 12.0.5 Changes 30-APR-13

  • Updated WW Internal Resources
  • ME Copy: fixed issue where Copy functionality would not copy a ME BOM because it incorrectly detected that the BOM ID already exists.

V10.0.6 / 11.0.5 / 12.0.4 Changes 19-APR-13

  • Updated WW Internal Resources
  • Fixed several minor user-interface bugs
  • Fixed issue where Mfg Est. sub-assembly BOMs were not being created during the Accept process
  • SOP Link can now be used to create a new link without starting from SOP

V10.0.5 / 11.0.4 / 12.0.3 Changes 1-FEB-13

  • Updated WW Internal Resources
  • Converted to use web-based help documentation

V10.0.4 / 11.0.3 / 12.0.2 Changes 24-SEP-12

  • Updated WW Internal Resources

V10.0.3 / 11.0.2 / 12.0.1 Changes 4-AUG-12

  • Updated WW Internal Resources

V10.0.2 / 11.0.1 Changes 11-DEC-2011

  • First Release