Customization CR1006
Parts List Utility
Description of Need:
ACME needs to report on components within a top-level item, in the manner shown below. Rather than an “Exploded BOM,” this is more of a “Parts List.”
ACME will need to run … more...
Category: Manufacturing
Customization CR1508: MFG Allocation Settings
Customization CR1508
MFG Allocation Settings
Description of Need:
ACME has GP Manufacturing set to allocate the picklist when the MO Status is changed to Released. Due to the length of the manufacturing process, they would like to have control over … more...
Customization DS1293- MO Receipt Entry- Bin Selector Override
Customization DS1293
MO Receipt Entry – Bin Selection Override
Problem Definition:
ACME uses Dynamics GP Manufacturing. MO Receipts are performed on handhelds using Accellos.
Pertinent configuration:
- Inventory multi-bin is enabled
- Inventory is set to allow adjustment overrides. They frequently drive
Customization CR1196 – MFG Auto-allocation from Multiple Bins
Customization CR1196
MFG Auto-allocation from Multiple Bins
Description of Need:
When Manufacturing Allocates inventory it does so only from the Default Material Issue Bin set up on the Item-Site. If there is not enough inventory in that bin, the user … more...
Customization DS1115- WIP Cost Reversal
Customization DS1115
WIP Cost Reversal
Problem Definition:
ACME builds water dispensers. Some units contain high value assemblies which are treated as capital equipment, so the value is not in an inventory account. When these assemblies are used on a manufacturing … more...
Customization DS1422 Autofill Lot Numbers in MFG PowerPack/Quick Disassembly
Customization DS1422
Autofill Lot Numbers in MFG PowerPack/Quick Disassembly
Problem Definition:
ACME manufactures airplanes. They package the various assemblies of a plane into kits that will be shipped to the customer. At times, ACME needs to disassemble the kits in … more...
Customization DS1457 Routing Sequence OSRC Address Info
Customization DS1457
Routing Sequence OSRC Address Info
Problem Definition:
ACME uses Dynamics GP Manufacturing and creates Outsourcing POs from Manufacturing. Several of their Vendors have multiple locations, and ACME has multiple facilities. Because the PO created from MFG defaults to … more...
Virtual Trigger VT1151 Assembly Transaction- Change Assemble Quantity
Virtual Trigger VT1151
Assembly Transaction- Change Assemble Quantity
Note: Virtual Triggers is a module from the WilloWare product Consulting Toolkit.
Virtual Triggers provides the ability to quickly enhance GP functionality with small bits of dexterity code.
Description of Need:
ACME … more...
Customization CR0955 Picklist PO Gen
Customization CR0955
Picklist PO Gen
Description of Need:
ACME can have several hundred new Manufacturing Orders at any given time. Some inventory replenishment is planned via MRP, but other items are purchased as needed when MOs are released and the … more...
Customization DS0803 Auto-create PO from MO Pick List
Customization DS0803
Auto-create PO from MO Pick List
Problem Definition:
ACME requires the ability to auto-generate Purchase Orders direct from Manufacturing Order Pick Lists for Buy Items with shortages that are not MRP planned for the Item/Site combination.
Purchase Order … more...
DS1333 ATP Demand Planning
DS1333
ATP Demand Planning
Problem Definition:
ACME uses WilloWare’s PowerATP window and MRP. The approach with MRP is that it detects a shortage and suggests creating a new supply (i.e. a PO) or changing the date/quantity of an existing supply … more...
Customization DS1360 MO Receipt: Import Finished Good Lots
Customization DS1360
MO Receipt: Import Finished Good Lots
Problem Definition:
ACME produces bales of non-wood ag-based fiber using Microsoft Dynamics GP Manufacturing to record the manufacturing activities. Each Manufacturing Order can produce 30-50 bales, each of which is recorded with … more...
Customization CR1407- ITT Visibility to MRP
Customization
CR1407
ITT Visibility to MRP
Description of Need:
ACME uses Dynamics GP Manufacturing.
They need to have full visibility to inventory balances, supply/demand and movements throughout the system. They use In-Transit Transfer documents.
In-Transit Transfer documents are not visible … more...
Customization CR0701 MO Number Creation Update
CR0701
MO Number Creation Update
Description of Need:
Currently, the MO Number that is auto-generated from the Sales Order is created as SOPNUMBE_LNITMSEQ. ACME would like the MO Number to also include a prefix which will represent the Site which … more...
Customization CR0457 Automated Forecast
Customization CR0457
Automated Forecast
Description of Need:
ACME Would Like:
- Ability to specify Item Classes to include on a Forecast. Specify the item classes linked to a specific Sales Forecast ID.
- Specify number of months forward to forecast. Forecast quantity
Customization CR1069- Auto-Fulfill SOP Line from MO Receipt
Customization CR1069
Auto-Fulfill SOP Line from MO Receipt
Description of Need:
The normal Manufacturing Receipt posting process detects when an MO is linked to a Sales Line, and does the following:
- It increases the Qty To Invoice on the sales
Customization CR1206- Lot Number Suffix by Receipt
Customization CR1206
Lot Number Suffix by Receipt
Description of Need:
ACME can receive multiple receipts of the same Lot Number over a period of time. They need to be able to select Lots for use in Manufacturing by the order … more...
Customization DS1261 Historical Stock Status with Lot Numbers
Customization DS1261
Historical Stock Status with Lot Numbers
Acme, Inc uses Microsoft Dynamics GP. Dynamics GP provides a Historical Stock Status Report by Item Number, but Acme needs Lot Number level detail.
A new Historical Stock … more...
Automatic Update Labor and Cycle Time on Routing Sequence
DS0784
Automatic Update Labor and Cycle Time on Routing Sequence
Historically, Acme has setup item routing values for Labor Time and Cycle Time in Dynamics GP when a product is commercialized. The Senior Cost Accountant at Acme has … more...
Fulfill SOP on MO Receipt
DS1041
Fulfill SOP on MO Receipt
Problem Definition
ACME Co uses CRM to bring sales orders into GP, and if necessary, the process also generates a manufacturing order to produce the sales item. Currently, the standard MOP-SOP linking is used … more...
Material Test Report
Summary of Requirement
ACMECO manufactures equipment for Oil and Gas drilling. The materials used (steel) in the manufacturing process have a large amount of testing data associated with each Lot Number that need to be tracked from purchasing through to … more...
Manufacturer Representative
Summary of Requirement
ACMECO sells direct (where they act as a distributor), and also as a representative of a manufacturer. In the rep sales, ACMECO receives a commission from the manufacturer for the sale, but manufacturing, order fulfillment and invoicing … more...
MFG and RMA Item Revision Levels
Summary of Requirement
ACME Co. plans to purchase two WilloWare products:
- Purchase Order Revision Levels
- Sales Order Revision Levels
In addition to the functionality that these two products provide, ACME requires additional features:
- ACME would like the current Item Revision
Multi Bin & MO Receipts
Summary of Requirement
ACME Co. makes nutritional supplements and drinks. There are two areas of need.
Multi-Bin Enhancements
GP is being implemented with multi-bins where each bin represents a different physical location. Bins are being used in this manner so … more...
Assembly Serial Linking
Summary of Requirement
ACME Co. has a new product being released that is going to affect how they create configurations in service. Currently they are using the MO Serial Linking to build configurations. This new product has serial numbered components … more...
SOP-to-MOP Enhancements
Summary of Requirement
The following requests are addressed:
- Sales Document Holds
- Sales Line Holds
- Requested Ship Date Audit Trail
- Customer Assigned Serial Numbers
- MO Holds- ability to control if the hold removes the MO from MRP, CRP, both or neither
Assembly Serial Entry & Field Service Enhancements
Summary of Requirement
ACME Co. produces serial numbered units with several serial numbered subassemblies. Many of these items are from subcontractors and never go through ACME inventory.
GP Manufacturing is used to produce the complete unit, and many of the … more...
Replace SOP Line Item Number with Configured BOM Name
Summary of Requirement
When printing a SOP Order or Invoice, ACME Co. would like to use the Configuration BOM Name in place of the Item Number if the item has a configuration BOM.
If the MOP-SOP linked MO is not … more...
Manufacturing Enhancements
Summary of Requirement
ACME Co. requires the following enhancements to GP Manufacturing:
1. BOM Import / BOM Change – trigger Picklist Update: when WilloWare’s BOM Import utility imports an update to an existing BOM, if there are any MOs using … more...
Update Working Routing Upon MO Release
Summary of Requirement
ACME Co. places MO’s in the system with an Open status many months before production begins so that the MO can drive MRP and scheduling.
During the time between when the MO is first created and when … more...
Assign Finished Good Lot Number based on Component Lot Number
Summary of Requirement
ACME Co. is currently utilizing Quick MO’s with the setting “Manually select serial/lot numbers in Quick MO” selected. To create efficiency in closing Quick MOs, and improve trace-ability, they would like the MO’s Finished Good to have … more...
Service Call Requirements Visible to MRP
Summary of Requirement
ACME Co. utilizes the Service Call Management Module. Demand for Service Call parts does not appear as demand within the MRP module. ACME would like the Service Parts Requirements to show in MRP.
Design Specification
View design … more...
Sync Item Resource Planning Replenishment Method to Item Engineering
Summary of Requirement
ACME has found that their Item Engineering Data and their Item Resource Planning records are not in sync. ACME would like the Item Engineering Data window “BOM Should Treat As Field” to be the master control for … more...
Advanced Manufacturing Data Collection
Summary of Requirement
ACME Co. is a leading manufacturer of custom engineered mechanical seals and welded metal bellows. ACME has a full line of component and cartridge seals that have been sealing the industry’s most basic and challenging applications for … more...
Automated Sales-MO Generator
Summary of Requirement
ACME Co. is implementing SalesPad to be used in conjunction with Dynamics GP. Users will be entering Sales Orders directly into SalesPad. SalesPad does not have a link to the Manufacturing Module. Creation of Manufacturing Orders direct … more...
Update COGS, Revenue, and Markdown Account when Posting Sales Documents
Summary of Requirement
ACME Co. utilizes Dynamics GP as their ERP system. They currently have many legal entities maintained in the same database. In addition to the core GP Modules, they also utilize the Manufacturing Module. Sales Invoice and Sales … more...
Sales Order Line Fulfillment Upon MO Receipt
Summary of Requirement
ACME currently has an enhancement that generates Manufacturing Orders for Sales Lines created through SalesPad and creates the MO to Sales Order link. When the Manufacturing Order is received, standard Dynamics GP allocates the newly available inventory … more...
Quick MO Automation
Summary of Requirement
ACME Co. currently utilizes Dynamics GP to manage and support Inventory Control. In conjunction with the Inventory Control module they also use Manufacturing. The manufacturing process handles make to stock counter tops (a.k.a. Granite Slabs) and sinks … more...